Mishimoto Performance Intercooler | 2012-2016 BMW F22/F30 (MMINT-F30-12BK)

BMW F22/F30 Performance Intercooler by Mishimoto

Make your Ultimate Driving Machine even more ultimate with the addition of the Mishimoto BMW 2012-2016 F22/F30 Chassis Performance Intercooler! From the factory, the N20/26 and N55 engines are a prowess of German engineering, but the stock intercooler unit poses as a weak link for your turbocharged Bimmer. The tube-and-fin design coupled with plastic end tanks makes for the perfect environment for heat to set up residence and throttle the power of your 2, 3, or 4-series, especially for those running a tune.

Mishimoto is here to unlock the full potential of your N20/26 and N55 engines with our Performance Intercooler specifically designed for the F22/F30 chassis. Our unique 6 thick step-core design adds a 115 angle to the top section to allow for additional charged air cooling without fully obstructing other heat exchangers. Tubes and fins are a thing of the past with this design as we engineered our intercooler with a bar-and-plate construction, optimizing this intercooler for heat dissipation with minimal pressure drop.

Coupled together, our features were able to drop intercooler outlet temperatures by 45F, and add 10 whp and 8 wtq all on the stock tune of our 2017 M2 test vehicle. The BMW F22/F30 Performance Intercooler is available in silver or black and also includes the Mishimoto Lifetime Warranty.

Features

• Direct fit for the 2012-2016 BMW F22/F30 Chassis
• 6 thick, angled step-core design optimized for maximum flow without fully obstructing other heat exchangers
• Max power gains of 10 whp and 8 wtq on stock tuning
• Drops intercooler outlet temperature by 45F on stock tuning
• Optimal core design for maximum cooling efficiency with minimal pressure drop
• Intercooler core volume increased by 96%
• External fin surface area increased by 130%
• Header plate includes shroud specifically designed to seal against curved factory crash beam
• Retains factory quick-disconnect fittings for compatibility with stock piping
• Available in silver or black

Please Note: M2 owners will need to either remove or modify the front core support brace for installation. Please refer to the installation guide for proper modification instructions.

27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Applications

• 2014 – 2016 BMW 228i/228i xDrive
• 2014 – 2016 BMW M235i/M235i xDrive
• 2013 – 2016 BMW 320i/320i xDrive
• 2012 – 2016 BMW 328i/328i xDrive
• 2012 – 2016 BMW 328d/328d xDrive
• 2012 – 2016 BMW 335i/335i xDrive
• 2014 – 2016 BMW 428i/428i xDrive
• 2014 – 2016 BMW 435i/435i xDrive
• 2016 – 2018 BMW M2

What’s In The Box?

• 1 – Performance Intercooler

References

• Installation Instructions
• Engineering Report

Warranty

• Mishimoto Lifetime Warranty