Aeromotive In-Tank Brushless Fuel Pump – 5.0 gpm Spur Gear (18375)

Universal 5gpm Brushless In-Tank Pump by Aeromotive Inc.

The 5.0 Brushless Stealth Pump, the flagship of Aeromotive electric fuel pumps, yields 5 gallons per minute at 13.5-V and 40-PSI. Built for up to 90 psi of sustained pressure, this new pump features our integral, internal Spur-Gear pumping mechanism which allows for higher pressures with minimal drop in flow.

Brushless motors employ sensors to monitor rotor angle to provide faster and more reliable phase shifting, producing more torque capacity and motor efficiency. Instead of the armature rotating, in a brushless motor the magnets rotate around the armature and the motor controller manages the phase shift to keep the motor rotating under load (load is related to pressure in a fuel pump). With more torque per watt and a higher torque to weight ratio, brushless motors produce lower noise and deliver higher reliability.

With a higher level of efficiency, down to fractions of a second in design speed control, the new Aeromotive brushless fuel pumps provide precise control of fuel pump RPM as pressure rises, better maintaining pump RPM and flow, producing a flatter flow curve. Tight tolerances result in less current draw, less heat and extended life. Now there is the ability to upgrade to a premium brushless pump for faster, more reliable and uninterrupted fuel delivery with less power consumption and potential for wear or failure.

Features

• Supports Fuel injected engines: GAS up to 3400 FWHP naturally aspirated up to 2600 FWHP forced air induction Carbureted engines: GAS Up to 3600 FWHP naturally aspirated Up to 2700 FWHP forced air induction Fuel injected engines: E85 up to 2380 FWHP naturally aspirated up to 1820 FWHP forced air induction Carbureted engines: E85 Up to 2520 FWHP naturally aspirated Up to 1890 FWHP forced air induction
• ORB-10 outlet port.
• ORB-12 inlet with integrated pickup and 100-m Pre-filter.
• Adjustable filter for fuel cells 10-16in in height.
• For EFI applications use regulator P/N 13134 or P/N 13110.
• For carbureted applications use regulator P/N 13202 or P/N 13212.
• Capable of 90-PSI continuous operating pressure, 150 PSI peak pressure, base plus boost.
• Perfect for blow-through carbureted engines up to 2,700 FWHP (race gas).
• Upgrade your standard brushless pump to make it True Variable Speed by buying the 18047 retrofit kit cap.
• Turbine pump mechanism increases durability.
• In-tank use only.

Applications

• Universal

What’s In The Box?

• 1 – Dual Phantom Flex Pump.

Warranty

• Manufacturer’s Warranty